Balboa GL2000 mach3 PCB (PLASTIC BOX ONLY)

Balboa GL2000 mach3 PCB (PLASTIC BOX ONLY) printkort, hovedkort GL2000

PrisNOK6 900,00 inkl. mva.
Ønskeliste
  • Produktinfo
  • Produktanmeldelser (0)

Produktet er sluttproduktet hos Balboa, kun tilgjengelig så lenge det er varer igjen på lager 

Balboa GL2000 mach3 PCB (PLASTIC BOX ONLY)

OBS!! Passer kun plastboks utgaven, har du GL2000 metal boks må ikke dette brukes. 

Type of Product: PCB or Circuit Board
Manufacturer: Balboa
Power: Volts: 230
Hz: 50
Watts: 
Amps: 
HP: 
Specifications: Pump 1: Single or dual speed pump + circulation pump if required.
Pump 2: Single or dual speed (if no blower used)
Pump 3 or Air Blower: x 1 (if pump 2 is single speed)
Extra port: Available only with the addition of an expander board
Heater: Yes
Ozone: Yes
Light: 12 volts or 230 volts
Sensor style: M7 x 2
Pressure Switch: No
Compatible With: GL2000/1 mach 3 control box. Topside controls from the high spec ML range such as theML400, ML700 or ML900.
Hot Tubs: Hydrospa Essence PCB SN HSEX2000 54234
(MUST NOT BE USED IN METAL BOX, FOR USE WITH PLASTIC BOX ONLY)
Dimensions: Length: 290 mm
Height: 155 mm
Additional Notes: This PCB is used as a replacement for an existing GL2000 mach 3 control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.

OBS!! Elekrtonikk og elektriske deler tas ikke i retur. 

Balboa site

Balboa : 53708-04
Volition : 2LG

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.