Balboa GS510SZ PCB

Balboa GS510SZ PCB

PrisNOK4 900,00 inkl. mva.
Ønskeliste
  • Produktinfo
  • Produktanmeldelser (0)

Balboa GS510SZ PCB

Type of Product: PCB or Circuit Board
Manufacturer: Balboa
Power: Volts: 230 Hz: 50
Specifications: Pump 1: Single or dual speed + circulation pump if required Pump 2: Single speed Pump 3: N/A Air Blower: Yes (optional) Heater: Yes Ozone: Yes Light: 12 volt Sensor style: M7 x 2 Pressure Switch: No
Compatible With: GS510SZ control box. Topside controls from the serial standard VL range such as the VL700S and the VL701S. Commonly used with Spaform amongst others. Replaces old board 53642 GS510S.
Dimensions: Length: 280 mm Height: 130 mm
Additional Notes:

This PCB is used as a replacement for an existing GS510SZ control box with a PCB failure. This must not be fitted to any other device/product. This should be done by an experienced tradesman or a competent individual as a faulty install could result in board damage and invalidate the warranty.

*SPECIAL NOTE* J17 IS A PORT THAT ALLOWS YOU TO RUN EITHER AN AIR BLOWER OR ANOTHER SINGLE SPEED PUMP. THE PORT IS PROTECTED BY A 10 AMP QUICK BLOW FUSE.

This printed circuit board is a spare part for Balboa GS501SZ, GS504SZ, GS510SZ, GS511SZ, GS512SZ, GS513SZ and GS514SZ control systems. The GS510SZ and GS514SZ systems also include a X-P231 55025 expansion board, which you should purchase separately, if needed.

To avoid any risk of error while ordering the motherboard, please ensure that you have the correct reference for the control system. The reference either on the label on the casing or on the bottom-right corner of the motherboard itself. Do not be distracted by the reference printed in the bottom-left corner of the motherboard (typically GS500Z), as it is only an indication of the basic series of circuit board used.

This board is only compatible with Balboa's plastic casings, and will not fit the older metal boxes.

Part numbers

Balboa: 54516-02
Volition : ZS015SG

 

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.