Type of Product: |
Heater assembly |
Manufacturer: |
LX |
Box Quantity: |
126 |
Power: |
Volts: 230 Hz: 50 KW: 3.0 Amps: 13.6 HP: |
Specifications: |
Sensor compatibility: Controlled by the system control boxMaterial spec:Required flow rate: Set by a pressure switch, this switch will need to be pressurised, if it runs straight to a big bore outlet with no bends, there will be no back pressure and it may not workFlow detection: Pressure switch built into the heater run on a separate cord |
Compatible With: |
Most Chinese spas with a small plumbing change or can be used as a remote heater on a bespoke project |
Connections & Fixings: |
1.5 inch white plastic female sockets to connect to plumbing |
Dimensions: |
Length: Diameter: 50 mm Between terminals: 120 mm Overall length complete: 340 mm |
Additional Notes: |
This unit replaces the Rooster heater as they kept failing. This heater is longer than the Rooster so you may need to alter the plumbing slightly
High limit thermal cutout built in. This unit is rated IPX5 and has CE approval.
|